Model 42001
How to Wear the AULEXMED 42001 ROM Knee Brace
General positioning and strap checks for BL-42001, used alongside current instructions and prescribed hinge settings.
Direct answer
Position the BL-42001 brace so the knee and side hinges align with the leg, then secure the straps evenly in the sequence shown by the supplied instructions. Do not independently change a prescribed range-of-motion setting.
01
Identify the model and setting
Confirm model BL-42001 and review the supplied instructions before placing the brace. If a hinge setting was provided for you, preserve that setting unless an authorized person instructs otherwise.
- Confirm both hinge assemblies
- Open the straps before positioning
- Check that pads and straps are flat
- Do not guess a range-of-motion setting
02
Position, fasten, recheck
Center the knee area, align the side structure with the leg and fasten the straps evenly. Recheck alignment after initial movement because the brace can shift if straps are uneven.
| Check | What to look for |
|---|---|
| Alignment | Side hinges remain aligned around the knee area |
| Straps | Secure and even, without twisting |
| Contact | No concentrated pressure or unsafe skin response |
| Movement | Only within the instructed configuration |
Evidence boundary
What this answer is based on
The exact hinge setting and wearing protocol are user-specific and must come from the applicable instructions or qualified professional guidance.